- Description
- Related Files
- Discussion
Avatar Kit V2 (Dual Antennas) The Avatar HD system uses the H.265 codec, a cutting-edge technology, to deliver 1080p FPV image quality with low latency. The camera (32G VTX KIT) supports Gyroflow and provides smooth and stable video quality. New VTX with improved TVS protection and up to 6S support. With a wide input voltage range of 6V to 25.2V, our VTX provides unmatched stability. The Avatar VTX comes with 32g of built-in storage that can record 1080p or 720p HD aerial videos without interference. Built-in 32G storage, video recording time increased 4 times. It supports both high frame rate and standard frame rate, it has an average latency of 22ms with high frame rate. Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is improved and the working performance of the entire frequency band is more stable. Specifications Camera Model: Camera Avatar V2 Image sensor: 1/3.2 inch 4Mp 4:3 sensor Resolution: 1080P/60fps; 720P/100fps; 720P/60fps; 1080P/120fps compatibility; 1080P/100fps compatibility; Aspect ratio: 4:3 native /16:9 Lens: 2.1mm FOV: 160° Aperture: F2.0 Shutter: Shutter Min. illumination: 0.001 Lux Weight: 7.2g Dimensions: 19*19*22mm Coaxial cable: 140 mm Gyroflow: Only 32G VTX supported VTX Model: Avatar V2 Module (Dual Antenna) Communication frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC: <25dBm Interface 1/O: JST1.0*4(Power)JST0.8*6(USB) Mounting holes: 25.5*25.5mm; 20*20 mm Dimensions: 33.5*33.5*10.5mm Storage: 32G Recording: 1080p/720p Weight: 15.4g Operating temperature: -20-40℃ Channels: 8 Wide power input: 6V-25.2V Supported FC system: Betaflight; Inv; Fettec; ArduPilot; Kiss OSD: Screen mode Latency: Average delay of 22 ms Antenna: 2 (IPEX) Antenna Avatar V2 Polarization: LHCP Bandwidth: 5600 MHz-6000 MHz Gain: 1.9 dBi VSWR: ≤1.5 Input impedance: 50Ω Interface: IPEX-1 Size: R15 x 45mm (without cable) Weight: 2g Packing List: 1x USB transfer extension cable 1x 4-pin silicone cable 8x screws M2*4mm 4x M2*5mm screws 4x M2*6mm screws 4x screws M2*14mm 4x M2*5*0.5mm gasket
Let customers speak for us
pirkau ant tinywhoop signalui gerint, siek tiek ilgesne nei tikejaus bet tiko
Paulius
Antenna RushFPV Cherry UFL 5.8G RHCP
Works good with Pavo. I would prefer 550mAh but often tricky to find..
Mika Tuominen
Battery BETAFPV LAVA LiHv 3S 11.4V 450mAh 75C (2PCS)
The product is exactly what I was expecting. The communication with the shop was constant and easy. No doubt it will be my main place for the drone hobby. 100% recommended.
Anonymous
Controller RadioMaster Pocket ELRS Charcoal
Quite nice product in short. Fullfills my expectations about this product.
Mika Tuominen
FPV Drone BETAFPV Pavo20 Pro Whoop O4 Pro PNP, ELRS 2.4G
